Installation Sheet

4
7. Place a small amount of paint or chalk on the end of
the latch bolt. Then, close the door and turn the knob
several times to transfer the paint onto the door frame
to mark the strike plate location.
8. Position the strike plate on the door frame. The
curved edge should touch the curved edge of the
latch bolt when the door is closed. Then, secure the
strike box and strike plate to the door frame with the
remaining wood screws.
Note: If necessary, mortise the area around the hole
so the strike plate is flush with the door frame.
5. With the spindle centered, thread the exterior door
knob onto the latch bolt assembly. Insert the interior
door knob, fitting it over the spindle and aligning the
screws holes.
6. Hand thread the mounting hardware through the
exterior door knob and tighten firmly with a screw-
driver.
DUMMY, PASSAGE,& PRIVACY SET
INSTALLATION INSTRUCTIONS