Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsHardwareHummingbird 8" Height Privacy Double Pocket Door Mortise Lock with Edge Pull and Push Button Release
12
2Pocket Door Pull Installation
9. Insert the pocket door pull assembly into the notch until the edge face of the pull is ush with the surface of the
door edge.
Note: The pull lever should pivot from the top.
10. Secure the pull to the door with the wood screws provided.
STRIKE PLATE INSTALLATION (PRIVACY SET ONLY)
1. To install the strike plate, mark the latch with lipstick or paint. Close the door, and turn the handle several times to
mark the door frame.
2. Drill a 1" deep hole 15/16" in diameter in the center of the marked area.
3. Place the striker plate over the hole and trace the outline of the plate with a pencil. If necessary, mortise the area
around the hole so the strike plate will t ush with the door frame.
4. Secure the strike plate to the door frame with screws.