Installation Sheet

PORCELAIN PEDESTAL SINK INSTALLATION
INSTALLATION
3. Drill pilot holes at the marked locations of the sink’s
mounting holes. If using anchors, insert the anchors
into the drilled holes.
Important: Attaching the sink to a hollow wall where
studs or wood blocking are not present could result in
future injury or extensive damage to your home if an
accident were to occur. Consult a professional if you
are unsure, or unfamiliar with this type of installation.
4. Move the sink and pedestal back into position at the
installation location. Attach the sink to the wall using
lag bolts. Tighten the lag bolts using a socket wrench
to secure the sink to the wall.
Important: The sink is fragile. Be very careful not to
overtighten the lag bolts, which could crack or break
the sink.
1. Temporarily fit the sink onto the pedestal. Place the
sink and pedestal at its desired mounting location.
Use a level to adjust the sink until it is perfectly aligned.
Once positioned properly, mark the location of the
sink’s mounting holes on the wall using a pencil.
2. Move the sink away from the installation location.
For convenience, install the sink drain before moving
on. Refer to the drain’s installation instructions for
guidance if needed.
2Porcelain Pedestal Sink Installation Instructions
X X
Move Sink
Install Drain
Mounting Hole
Markings
Move Sink Back
Lag Bolts