Installation Sheet

2
INSTALLATION
3. When the wax ring and bolts are attached, lift the
toilet and align the mounting holes with the anchor
bolts on the floor for proper placement.
4. Set the toilet down on the floor and press in place to
form a tight seal with the wax ring. Do not move the
toilet after placement, this could break the watertight
seal and cause leakage.
1. Press the new wax ring into place on the toilet
flange on the floor with the flat side down and the
tapered edge up. Apply enough pressure to hold the
ring in place during installation but be careful not to
press it out of shape.
2. Install the anchor bolts through the toilet flange.
The anchor bolts should be pointing upwards so that
when the toilet is placed the bolts will project through
the mounting holes on the base of the toilet.
TOILET
INSTALLATION INSTRUCTIONS