Installation Sheet

1Wall-Mount Tub Faucet Installation Instructions
WALL-MOUNT TUB FAUCET
INSTALLATION INSTRUCTIONS
Before installing, read entire installation instructions. Observe all local building and safety codes.
For the following installation instructions for your new faucet it is assumed that any old xtures have been removed and
that the water supply lines have been relocated to the proper installation location. A ½" pipe nipple should be attached to
the water supply line extending ½" from the nished wall.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1-866-855-2284. If you need assistance or have questions while installing your faucet, contact Customer
Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom xtures. Signature Hardware
accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.
TOOLS AND MATERIALS:
INSTALLATION
1. Remove the wall mount couplers from the faucet by unscrewing the large hex nuts behind the faucet handles.
2. Place thread sealant or plumber’s tape on the ½" pipe nipples protruding from the wall.
3. Run a bead of silicone sealant along the base of the wall couplers.
4. Thread the wall couplers onto the ½" pipe nipples.
5. Make sure the bases of the couplers are rmly against the wall and that the couplers are aligned properly. Wipe
away any excess sealant with a damp cloth.
6. Place the faucet body on the wall couplers. Hand tighten the coupling nuts to secure.
7. Install the hand shower and nozzle and any rubber sealing gaskets included.
8. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight
(no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow
the water to ow through the spout for approximately 60 seconds.
Allen Wrench (provided) Thread SealantLevel
Silicone Sealant