Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Trevana 1.2 GPM Single Hole Vessel Bathroom Faucet with Pop-Up Drain Assembly
12345
2
INSTALLATION
TREVENA SINGLE HOLE FAUCET INSTALLATION
Trevena Single Hole Faucet Installation Instructions
1. Ensure that the water supply below your sink is
completely shut off by turning the shutoff valves all the
way to the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
2. Attach the threaded mounting post to the faucet.
Slide the post into the base, and thread into the faucet
until hand-tight. The side of the post containing longer
thread should be facing downward.
3. Remove the brass lock nut from the mounting post
and set aside.
4. Insert the faucet into its prepared mounting hole. If
using the optional 4” baseplate, position the baseplate
over the mounting hole before inserting.
OFF