Installation Sheet

4Resin Tub Installation Instructions
RESIN TUB INSTALL
CLEANING AND MAINTENANCE
Resin has a nonporous surface that makes it resistant to stains, scratches and discoloration. To maintain the condition of
your new resin tub, simply wipe the surface with a dry, soft cloth after each use. Most dirt and dust will wash off with
clean, warm water. For a more thorough cleaning, be sure to use a mild cleaner such as a gentle dish soap. Avoid any
products that contain abrasives, acids, or ammonia.
SCRATCH REMOVAL
1. Use warm water to remove dirt and dust from the surface.
2. Use #800 sandpaper (coarse-grit) and rub in small, circular motions until the scratch is gone.
3. Follow with #1200 sandpaper (fine-grit) and rub over the surface of the scratch to smooth and blend.
4. Dry with a towel.
5. Polish the surface with a cloth and a polishing compound. Any automobile polishing compound will suffice.