Installation Sheet

2Resin Tub Installation Instructions
RESIN TUB INSTALL
INSTALLATION
1. Set the tub in the desired installation location and
mark the drain hole location on the floor.
2. Move the tub away from the installation location so
that the plumbing can be installed. The drain pipe
should extend approximately 6" above the finished
floor.
3. Trim the 1-½" PVC drain pipe extending from the
floor to the appropriate length. This can be determined
by attaching the drain to the tub and measuring the
distance from the finished floor to the center of the
fitting socket.
4. Attach the drain’s hub adapter to the PVC pipe with
PVC primer and cement. Place the rubber washer on
the rim of the adapter.
6 inches
Apply PVC
primer &
cement on
inner wall