Installation Sheet
5Acrylic Tub Installation and Care Guide
Press and Seal Swivel Drain
CLEANING AND MAINTENANCE
Wash your tub at least once a week with a gentle soap, such as dish-washing liquid, and warm water. Do not use any
abrasive cleaning pads or materials; we recommend the use of a soft sponge or microber washcloth. Vinegar can be
used to remove hard water buildup and mildew. Rinse with warm water and dry with a clean, soft cloth after each use.
Clean the silicone bead at base of the tub regularly with a 50/50 mix of water and chlorine bleach. Rinse with hot water
and wipe dry using a clean, soft cloth. We recommend bufng your tub every three months with white polishing
compound to maintain the nish.
SCRATCH REMOVAL
Perform the following steps to remove any scratches from your acrylic tub.
1. Using a damp sponge, wash the area with warm water and dish-washing liquid. Rinse thoroughly with warm
water.
2. Do not use any type of abrasive cleaning pads or chemicals. Read the labels on your cleaners to be sure they are
gentle enough to be used on your acrylic tub.
3. Apply circular, even strokes to the scratched area using dampened ne-grit sandpaper.
4. Wipe the area clean with a damp sponge and rinse thoroughly.
5. Apply white polishing compound and water with a soft, clean cloth. Rub in a circular motion to polish and buff the
area.
6. Wipe off any excess residue and rinse the tub with warm water. Dry the surface with a clean, soft cloth.