Installation Sheet

1Ultra Faucet Installation Instructions

INSTALLATION

ULTRA FAUCET INSTALLATION

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

faucet, plumbing, sink, counter top, or for personal injury

during installation.

Observe all local plumbing and building codes.

Unpack and inspect the faucet for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

Ensure that you have gathered all the required

materials that are needed for the installation.

For these instructions, it is assumed that the old

faucet has been completely removed and any

necessary repairs or modiﬁcations to the water

supply have been completed.

TOOLS AND MATERIALS:

Plumbers

Tape

Thread

Sealant

Adjustable

Wrench

Phillips

Screwdriver

Small

Bucket

2. Remove the lock nuts, metal washer, and rubber

washer from the faucet’s mounting posts.

1. Ensure that the water supply below your sink is shut

oﬀ.

Tip: Place a small bucket below your workspace to

catch any water that may drip during the installation

process.

OFF

Rubber Washer

Metal Washer

Lock Nuts

SKU(s): 920379

PAGE 1
SKU(s): 920379 ULTRA FAUCET INSTALLATION BEFORE YOU BEGIN INSTALLATION We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation. 1. Ensure that the water supply below your sink is shut oﬀ. Observe all local plumbing and building codes.
PAGE 2
ULTRA FAUCET INSTALLATION 3. Insert the faucet into its prepared mounting hole. Once in position, slide the rubber washer followed by the metal washer back onto the faucet’s mounting posts. Secure the faucet using the lock nuts. Tighten ﬁrmly using the provided basin wrench. 5. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath. ON 4. Attach the main supply lines to the braided water lines on the faucet.