Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Exira Thermostatic Shower System with 12" Rainfall Shower Head, Wall Mounted Shower Head, Hand Shower, and 4 Body Sprays - Rough In Included

EXIRA SHOWER SET INSTALLATION

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

plumbing, ﬂoor, walls, tub, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the items for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

Ensure that you have gathered all the required

materials that are needed for the installation.

For the following installation instructions, it is

assumed that the wall has been opened and that the

existing shower set has been removed.

Before you begin, the main water supply to your home

should be shut oﬀ.

TOOLS AND MATERIALS:

Plumbers

Tape

Adjustable

Wrench

Phillips

Screwdriver

1Exira Shower Set Installation Instructions

Tape Measure

Drill

Hex Wrench

Wood Blocking

Soldering Kit

(for copper pipe)*

½" Test Plug

Level

Pencil or

Marker

SKU(s): 925470

Summary of content (6 pages)

PAGE 1
SKU(s): 925470 EXIRA SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, ﬂoor, walls, tub, or for personal injury during installation. TOOLS AND MATERIALS: Plumbers Tape Adjustable Wrench Phillips Screwdriver Drill Hex Wrench Soldering Kit (for copper pipe)* ½" Test Plug Observe all local plumbing and building codes.
PAGE 2
EXIRA SHOWER SET INSTALLATION Step 1: Valve Installation 1. To prepare for installation, wood blocking should be installed between the two studs where the valve will mount. The wood blocking will need to be installed 2 ¼”-2 ¾” behind the ﬁnished wall. Important: Take into consideration the thickness of the ﬁnished wall materials, such as tile, when calculating measurements. 3. Route, assemble, and connect all in-wall piping as desired to and from the shower valve.
PAGE 3
EXIRA SHOWER SET INSTALLATION Step 2: Trim Installation 4. Once all piping is routed and connections have been made, use the provided ½” test plug to perform a water pressure test. Turn on the main water supply to the home and water test the installed plumbing. Ensure that there are no leaks, then shut the water oﬀ. Remove the test plug. 1. Once the ﬁnished wall is complete, remove the protective sleeves from the valve stems. If the test plug has not yet been removed, remove that as well.
PAGE 4
EXIRA SHOWER SET INSTALLATION 3. Attach the 3-way diverter handle to the top stem by sliding it onto the spindle and tightening the set screw underneath, using the provided hex wrench. Repeat these steps to install the bottom single-function handle. 5. To install the hand shower’s water supply elbow, thread it onto the prepared 1/2” NPT pipe nipple. Apply thread sealant or plumber’s tape to the threads before tightening. Be sure to use the decorative escutcheon to conceal the rough-in. 4.
PAGE 5
EXIRA SHOWER SET INSTALLATION 7. Once the mounting brackets are attached to the wall, attach the slide bar by mounting it onto the brackets. To secure, tighten the set screws located on the slide bar using the provided hex wrench. 8. Attach the hand shower to the supply elbow using the hand shower hose. Apply thread sealant or plumber’s tape to the threads before tightening. Hand tighten the connections ﬁrmly. 9. Install each of the body jets by threading them into the prepared female ﬁttings.
PAGE 6
EXIRA SHOWER SET INSTALLATION 11. Complete the installation by attaching the shower heads to the installed shower arms. Apply thread sealant or plumber’s tape to the threads before tightening. 12. Turn the main water supply back on, and test the completed shower system. Ensure that there are no leaks and that all functions are working properly.