Installation Sheet

1Stainless Steel Outdoor Shower Installation Instructions
STAINLESS STEEL EXPOSED OUTDOOR SHOWER
INSTALLATION INSTRUCTIONS
Before installing, read entire Outdoor Shower Installation Instructions. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1.866.855.2284. If you need assistance or have questions while installing your Outdoor Shower, contact
Customer Service.
Because wall construction and materials vary from home to home, Signature Hardware does not provide mounting
hardware for all of our outdoor products. The appropriate mounting hardware can be purchased from your local hardware
store.
We recommend consulting a professional if you are unfamiliar with installing outdoor and plumbing xtures. Signature
Hardware accepts no liability for any damage to the shower, installation surface, or for personal injury during installation.
TOOLS AND MATERIALS:
INSTALLATION
1. Loosen the set screw on the wall support loop with the Allen wrench provided. Slide the loop up the riser to the
appropriate location and re-tighten the set screw to secure.
2. Thread the wall ange onto the wall support loop.
3. Place the decorative escutcheon on the handle valve and thread the valve directly onto the water supply line.
4. Slide the riser nut up the shower riser.
5. Insert the bottom of the riser into the handle valve. Slide the riser nut back down and tighten.
6. Mark the location of the mounting holes in the wall support ange and attach the shower to the mounting surface
with the appropriate mounting hardware.
7. Attach the shower head.
8. Turn on the water supply to check for leaks. Let the water ow through the shower head for approximately 30
seconds to clear out debris and dirt. If leakage occurs, contact Customer Service at 1-866-855-2284.
DrillPencil