Installation Sheet

1Bathroom Mirror Installation Instructions
BATHROOM MIRROR
INSTRUCTIONS
TOOLS AND MATERIALS:
Unpack and inspect the product for any
shipping damages. If you find damages, do not
install. Contact Customer Service at
1-866-855-2284. If you need assistance or
have questions while installing your mirror,
contact Customer Service.
We recommend consulting a professional if
you are unfamiliar with installing bathroom
fixtures. Signature Hardware accepts no
liability for any damage to the floor, walls or for
personal injury during installation.
BEFORE INSTALLING INSTALLATION
1. With the help of another person, center the mirror above the
sink at the appropriate height and mark a line at the top of the
mirror on the wall.
2. Locate and mark the position of the wall studs to which you
will fasten your mirror. You can find studs by listening for a solid
sound as you knock on the wall or by using a stud finder
Tip: If the studs in your bathroom do not line up to the mounting location for
your mirror, wood blocking can be installed between the studs using standard
2 x 4’s. We recommend consulting a professional if you are unfamiliar with this
type of installation.
3. Measure the location of the D rings or keyhole brackets on the
back of the mirror to determine the location of your mounting
hardware. Use the top of the mirror as your guideline. Use your
level to verify that the mounting hardware is properly aligned.
4. Drill pilot holes and install the mounting hardware. Because
wall construction and materials vary from home to home,
the appropriate mounting hardware may need to be purchased
from your local hardware store. Consult a professional if you are
unfamiliar with this type of installation.
5. With the help of another person, hang your mirror by attaching
the D rings or keyhole brackets to the mounting hardware.
Read entire Bathroom Mirror Installation
Instructions. Observe all local building and
safety codes.
Pencil
Level
Drill
Tape Measure
Stud Finder