Installation Sheet

ManualsBrandsSignature Hardware ManualsKitchen FaucetsSignature Hardware Levi 1.8 GPM 3 Handle Single Hole Pre Rinse Kitchen Faucet

1Levi Kitchen Faucet Installation Instructions

LEVI KITCHEN FAUCET INSTALLATION

GETTING STARTED

TOOLS AND MATERIALS:

BEFORE YOU BEGIN

We recommend consulting a professional if

you are unfamiliar with installing plumbing

ﬁxtures. Signature Hardware accepts no

liability for any damage to the faucet,

plumbing, sink, counter top, or personal

injury during installation.

Observe all local plumbing and building

codes.

Unpack and inspect the item for shipping

damage. If any damage is found, contact

our Customer Relations team at

1-866-855-2284.

*not included

Ensure that you have gathered all of the

required materials that are needed for

the installation.

Plumber’s Tape*

For these instructions, it is assumed that

the old faucet has been completely

removed and any necessary repairs or

modiﬁcations to the water supply have

been completed.

Thread Sealant*

Screwdriver*

Adjustable

Wrench*

Hose

Spout Bracket

Counter Top

Escutcheon

Faucet Body

Spout

Gasket

Braided Water Supply (hot)

M5 Screw

Locking Nut

Locking Washer

Braided Water

Supply (cold)

Spout Spring

Check Valve

Hex Wrench Basin Wrench*

SKU(s): 927733, 927734

Summary of content (4 pages)

PAGE 1
SKU(s): 927733, 927734 LEVI KITCHEN FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the item for shipping damage. If any damage is found, contact our Customer Relations team at 1-866-855-2284.
PAGE 2
LEVI KITCHEN FAUCET INSTALLATION INSTALLATION 1. Ensure that the water supply below your sink is completely shut oﬀ by turning the shutoﬀ valves all the way to the right. 3. Remove the lock nut, metal washer, and rubber gasket from the faucet body. Insert the faucet body through the mounting hole in your counter top. Tip: Place a small bucket below your workspace to catch any water that may drip during the installation process. OFF 2.
PAGE 3
LEVI KITCHEN FAUCET INSTALLATION 5. Remove the check valves from the end of each braided hose on the faucet body. Apply plumber’s tape or thread sealant to the threading on each check valve and attach to your main water supply lines. Ensure that you are connecting the hot and cold lines appropriately. 6. From above the sink, ensure that the set screw on the back of the faucet body is tight before moving on. Use the provided hex wrench to tighten. 7. Attach the hose and spout spring to the faucet body.
PAGE 4
LEVI KITCHEN FAUCET INSTALLATION 8. Attach the sprayer to the faucet by threading it onto the end of the ﬂexible hose. Mount the sprayer into it’s cradle once attached. 9. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath. ON 10. Remove the aerator from the main faucet spout using the provided removal tool. Turn the faucet on and ensure that there are no leaks. Check to ensure that both hot and cold water are running properly.