Installation Sheet

5. Remove the check valves from the end of each
braided hose on the faucet body. Apply plumber’s tape
or thread sealant to the threading on each check valve
and attach to your main water supply lines. Ensure that
you are connecting the hot and cold lines appropriately.
3Levi Kitchen Faucet Installation Instructions
LEVI KITCHEN FAUCET INSTALLATION
6. From above the sink, ensure that the set screw on
the back of the faucet body is tight before moving on.
Use the provided hex wrench to tighten.
Tip: The set screw is located just above the faucet
handle, on the back of the valve.
7. Attach the hose and spout spring to the faucet body.
Apply a small amount of thread sealant, or plumber’s
tape, to the threading on the faucet body before
attaching.
Apply thread
sealant or
plumber’s tape
Set screw on backSet screw on back