Installation Sheet

BARLOW DECK MOUNT TUB FAUCET
INSTALLATION
3. From below, slide the rubber washers back onto the
couplers and tighten the lock nuts to secure the faucet
to the deck. Tighten firmly using an adustable wrench
or basin wrench.
4. From above, tighten the nuts connecting the
couplers to the faucet body. Use an adjustable wrench
and tighten firmly.
Tip: Wrap the nuts with a soft cloth before using an
adjustable wrench to tighten, to avoid scratching the
decorative finish.
1. Attach each of the deck mount couplers to the
inlets located on the back of the faucet body, as
shown. Apply plumber’s tape or thread sealant to the
threads before tightening. Hand tighten, do not yet
tighten firmly.
2. Remove the lock nuts and one rubber gasket from
each of the deck mount couplers. Insert the faucet
into its prepared mounting holes.
2Barlow Deck Mount Tub Faucet Installation Instructions
Apply thread
sealant or
plumber’s tape
Rubber Washer
Lock Nut
Rubber Washer
Lock Nut
Tighten Nuts