Installation Sheet

BARLOW DECK MOUNT TUB FAUCET
7. To complete the installation. connect the water
supply lines (not included) to the faucet’s inlets.
8. Once installation is complete, remove the aerator
from the spout and turn the faucet on for appoxi-
mately 60 seconds to check for any leaks. Ensure
that hot and cold water are running appropriately.
Divert water flow to the hand shower for testing as
well. Reattach the aerator.
5. Attach the hand shower cradle to the outlet
located on the top of the faucet body, as shown.
Apply plumber’s tape or thread sealant to the threads
before tightening. Tighten firmly using an adjustable
wrench.
6. Use the flexible hose to connect the hand shower
to the outlet located on the hand shower cradle, as
shown. Insert one of the provided rubber washers
into each end of the hose before attaching. Tighten
firmly.
3Barlow Deck Mount Tub Faucet Installation Instructions
60 sec
Apply thread
sealant or
plumber’s tape
Cold Water Line
Hot Water Line