Installation Sheet

1Wulan Teak Hanging Towel Rack Installation Instructions
WULAN TEAK HANGING TOWEL RACK
INSTALLATION INSTRUCTIONS
Before installing, read entire Wulan Teak Hanging Towel Rack Installation Instructions. Observe all local building and safety
codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service
at 1-866-855-2284. If you need assistance or have questions while installing your towel rack contact Customer Service.
We recommend anchoring any xtures that will bear weight to wall studs or solid wood blocking. If the studs in your
bathroom do not line up to the mounting location, wood blocking can be installed between the studs using standard 2 x 4’s.
We recommend consulting a professional if you are unfamiliar with this type of installation. Signature Hardware accepts no
liability for any damage to the oor, walls or for personal injury during installation.
TOOLS AND MATERIALS:
Stud Finder Pencil Tape Measure
Level Drill
INSTALLATION
1. Locate and mark the position of the wall studs to which you will fasten your towel rack. You can nd studs by listening
for a solid sound as you knock on the wall or by using a stud nder
2. Determine and mark the mounting location. Use a level to ensure the shelf is perfectly straight.
3. Measure the location of the keyhole brackets on the back of the towel rack to determine the location of your mounting
hardware.
4. Drill pilot holes and install the mounting hardware. Because wall construction and materials vary from home to home,
the appropriate mounting hardware may need to be purchased from your local hardware store. Consult a
professional if you are unfamiliar with this type of installation.
5. With the help of another person, hang your towel rack by attaching the keyhole brackets to the mounting hardware.