Installation Sheet
1Abner Freestanding Shower Panel Installation Instructions
ABNER FREESTANDING SHOWER PANEL
INSTALLATION INSTRUCTIONS
Before installing, read entire installation instructions. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1.866.855.2284. If you need assistance or have questions while installing your shower panel, contact
Customer Service.
We recommend consulting a professional if you are unfamiliar with installing outdoor and plumbing xtures. Signature
Hardware accepts no liability for any damage to the shower, installation surface, or for personal injury during installation.
TOOLS AND MATERIALS:
INSTALLATION
1. Attach the shower column to the tray with the assembly hardware provided.
2. Connect the water inlet hose on the bottom of the panel to the water supply.
3. Insert the shower arm into the tting in the panel and twist to tighten. Finish tightening with an adjustable wrench.
Wrap a dry cloth around the shower arm to protect the nish while tightening.
4. Thread the shower head onto the arm and hand-tighten.
5. Turn on the water supply to check for leaks. Let the water ow through the shower panel for approximately 30
seconds to clear out debris and dirt. If leakage occurs, tighten connections with your adjustable wrench as necessary.
If problems persist, contact Customer Service at 1-866-855-2284.
CARE AND MAINTENANCE
To maintain the natural wood nish, install and store the shower panel in a dry, well ventilated space. Do not clean the
shower or shower tray with any acidic soaps or detergents. After use, rinse with clean water and wipe dry to remove any
dirt or soap residue as this may damage the bamboo over time. To protect the nish and extend the lifetime of your out-
door shower, remove hard-soled shoes prior to stepping onto the shower tray.
Drill Adjustable Wrench