Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Lattimore Shower System with Rainfall Shower Head and Hand Shower - Rough In Included

LATTIMORE SHOWER SET INSTALLATION

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

plumbing, ﬂoor, walls, tub, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the items for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

Ensure that you have gathered all the required

materials that are needed for the installation.

For the following installation instructions, it is

assumed that the wall has been opened and that the

existing shower set has been removed.

Before you begin, the main water supply to your home

should be shut oﬀ.

TOOLS AND MATERIALS:

Plumbers

Tape

Adjustable

Wrench

1Lattimore Shower Set Installation Instructions

Tape Measure

Drill

Wood Blocking

Soldering Kit

(for copper pipe)

½" Test Plug

Level

Hex Wrench

SKU(s): 931419

Summary of content (5 pages)

PAGE 1
SKU(s): 931419 LATTIMORE SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, ﬂoor, walls, tub, or for personal injury during installation. TOOLS AND MATERIALS: Plumbers Tape Tape Measure Level Adjustable Wrench Hex Wrench Observe all local plumbing and building codes. Unpack and inspect the items for shipping damage.
PAGE 2
LATTIMORE SHOWER SET INSTALLATION Step 1: Valve Installation 1. To prepare for installation, wood blocking should be installed between the two studs where the valve will mount. Use the guide printed on the valve’s protective sleeve as a reference when installing the wood blocking. Important: Take into consideration the thickness of the ﬁnished wall materials, such as tile, when calculating measurements. If the ﬁnished wall extends beyond the maximum guideline marked, the trim pieces will not install. 3.
PAGE 3
LATTIMORE SHOWER SET INSTALLATION Step 2: Trim Installation 4. Once all piping is routed and connections have been made, use a ½” test plug to perform a water pressure test. Turn on the main water supply to your home and water test the installed plumbing. Ensure that there are no leaks, then shut the water oﬀ. Remove the test plug. 1. Once the ﬁnished wall is complete, remove the protective sleeves from the valve. If the test plug has not yet been removed, remove that as well.
PAGE 4
LATTIMORE SHOWER SET INSTALLATION 3. Remove the decorative screw cover from the valve handle. Slide the handle onto the valve stem and secure it by tightening the set screw with the provided hex wrench. Reinsert the screw cover to conceal the screw. 5. Attach the hand shower to the cradle using the hand shower hose. Insert one of the provided rubber O-rings into each end of the hose, and apply thread sealant or plumber’s tape to the threads before tightening. Hand tighten the connections ﬁrmly. 4.
PAGE 5
LATTIMORE SHOWER SET INSTALLATION 7. Install the shower head using the provided swivel joint. Apply thread sealant or plumber’s tape to the threads before tightening. Once secure, tighten the set screw located on the swivel joint using the provided hex wrench. 8. Turn the main water supply back on, and test the completed shower system. Ensure that there are no leaks and that all functions are working properly.