Installation Sheet

1Stiles Exposed Pipe Shower Installation
STILES EXPOSED PIPE SHOWER
INSTALLATION INSTRUCTIONS
Before installing, read entire Stiles Exposed Pipe Shower Installation Instructions. Observe all local building and safety
codes.
For the following installation instructions it is assumed that the water supply lines have been installed in the desired
location behind the nished wall and are accessible for shower installation.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1-866-855-2284. If you need assistance or have questions while installing your shower, contact Customer
Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom xtures. Signature Hardware
accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.
TOOLS AND MATERIALS:
IMPORTANT INFORMATION
• Install water supply lines in accordance with this manual.
• A oor drain should be installed in the shower location.
• Install the shower after construction is complete to avoid erosion or damage to the xture by paint or chemicals.
• Wrap the pipe threads with Teon tape prior to installation.
• To avoid damage to the shower, wrap a soft cloth around the pipe and shower head to before tightening with wrench.
• After installation, turn on the water supply and open the faucet valves. Check for any leaks and verify that the hot
and cold supplies are working correctly. Let the water ow through the riser pipe and shower hose for approximately
30 seconds to clear out debris and dirt
• If leakage occurs, tighten connections with your adjustable wrench as necessary. If problems persist, contact
Customer Service at 1-866-855-2284.
Smooth Jaw Wrench Adjustable Wrench Silicone Thread Sealant
Drill Tape Measure Level
Teon Tape Soft Cloth