Installation Sheet

3Recessed Medicine Cabinet Installation

INSTALLATION

1. To cut the hole for your recessed cabinet, center the cabinet above the sink at the appropriate height and draw

a leveled outline of the back of the cabinet on the wall.

2. Score the outline with a utility knife and level. After the area is scored, cut out the area with a keyhole or

reciprocating saw and remove the drywall.

3. When the space has been cleared of all obstructions, rmly attach horizontal 2 x 4 blocking to the vertical wall

studs with wood screws to create the framing for your cabinet. Make sure the drywall is secured to the edge of

the wall studs, inserting screws as necessary.

4. Slide the medicine cabinet into place. Verify that the cabinet is level; use wooden shims to adjust

as necessary.

5. Attach the cabinet to the wood blocking by driving 1/4" screws through the mounting holes in the sides of the

cabinet.

