Installation Sheet

1Ryle Pressure Balance Diverter Valve Installation Instructions

RYLE PRESSURE BALANCE DIVERTER VALVE

INSTALLATION INSTRUCTIONS

Before you begin, read the installation instructions below. Observe all local building and safety codes.

Service at 1.866.855.2284. If you need assistance or have questions while installing your diverter valve, contact

Customer Service.

Signature Hardware accepts no liability for any damage to the plumbing or wall, or for personal injury during

installation.

TOOLS AND MATERIALS:

INSTALLATION

Screwdriver

1. Install the valve body. Wrap the threaded portion

inlet and outlet.

2. Put the protective covers on the valve body

the protective covers.

4. Install the escutcheon, and handle. Tighten the set

screw with an Allen wrench to secure.

out

cold

hot