Installation Sheet
1Ryle Wall Mount Rainfall Shower Set with Body Jets Installation Instructions
RYLE WALL MOUNT RAINFALL SHOWER SET WITH BODY JETS
INSTALLATION INSTRUCTIONS
Before you begin, read the installation instructions below. Observe all local building and safety codes.
at 1.866.855.2284. If you need assistance or have questions while installing your diverter valve, contact Customer Service.
Signature Hardware accepts no liability for any damage to the plumbing or wall, or for personal injury during
installation.
TOOLS AND MATERIALS:
SHOWER VALVE INSTALLATION
Screwdriver
1. Install the valve body. Wrap the threaded portion
inlet and outlet.
2. Put the protective covers on the valve body
3.
the protective covers.
4. Install the escutcheon, and handle. Tighten the set
screw with an Allen wrench to secure.
Adjustable Wrench
Soft ClothSmooth Joint Pliers Silicone Sealant
cold
hot
out
out