Installation Sheet

ManualsBrandsSignature Hardware ManualsKitchen SinksReinhard 30" Single Basin Fireclay Farmhouse Sink

1Fireclay Farmhouse Sink Installation Instructions

INSTRUCTIONS

Unpack and inspect the sink for any shipping

damages and ensure that none of the required

pieces are missing. If you ﬁnd any damages, do

not install. Contact Customer Service at

1-866-855-2284. If you need assistance while

installing your new farmhouse sink, call our

Customer Service number.

Due to the manufacturing process, each sink

will vary slightly dimensionally. Farmhouse

sinks may require custom cabinetry. We

recommend consulting an experienced

cabinet maker for assistance. Providing the

cabinet maker with the actual sink to be

installed will ensure a custom ﬁt.

Please use assistance when lifting the sink in

order to avoid personal injury.

We recommend consulting a professional if

you are unfamiliar with installing kitchen

ﬁxtures and plumbing. Signature Hardware

accepts no liability for any damages to the

ﬂoor, walls, plumbing or personal injury during

installation.

TOOLS AND MATERIALS:

Pencil

Read the following installation below.

Observe all local plumbing and building codes.

BEFORE INSTALLING

MATERIAL DESCRIPTION AND CARE

Thread Sealant

Tape Measure

FIRECLAY FARMHOUSE SINK INSTALLATION

Safety Glasses

Framing Square

Level

Hacksaw

Wood Shims

Drill

Basin Wrench

**Sealant - We recommend the use of a

stone, marble and granite silicone caulk

or a general purpose silicone sealant.

Fireclay is known for its strength and durability. Fireclay sinks

are made of clay that is ﬁred at a heat of over 2,000 degrees

Fahrenheit. This produces an ideal material that is resistant

to scratching, staining, fading and discoloring.

Use a soft, non-scratching sponge or cloth with mild soap

and warm water or a gentle all-purpose cleaner for everyday

cleaning. Wipe the surface dry with a clean, soft cloth after

each use. Use a non-abrasive liquid or cream bathroom

cleaner for tough stains.

To avoid scratching, do not use highly aggressive cleaners

such as scouring liquids and powders or drain cleaners. To

avoid potential stains or damages to the ﬁnish avoid soaking

dishes for long periods of time and do not leave coﬀee

grounds or teabags sitting in the sink.

Summary of content (3 pages)

PAGE 1
FIRECLAY FARMHOUSE SINK INSTALLATION BEFORE INSTALLING TOOLS AND MATERIALS: Read the following installation below. Observe all local plumbing and building codes. Safety Glasses Framing Square Pencil Tape Measure Level Hacksaw Thread Sealant Wood Shims Basin Wrench INSTRUCTIONS Unpack and inspect the sink for any shipping damages and ensure that none of the required pieces are missing. If you ﬁnd any damages, do not install. Contact Customer Service at 1-866-855-2284.
PAGE 2
FIRECLAY FARMHOUSE SINK INSTALLATION INSTALLATION OPTIONS We recommend undermount sink installation. Flush-mount and built-up installation are not recommended. Ensure there is adequate room for the faucet and backsplash installations. TEMPLATE AND CUTOUT No template is provided since each sink will vary dimensionally. After centering the sink, trace the outline of the sink on the counter-top with a pencil to use as a guide for the cutout. Remember to allow clearance for any faucets and/or backsplashes.
PAGE 3
FIRECLAY FARMHOUSE SINK INSTALLATION FINAL PLACEMENT Test ﬁt the sink in the opening that was created in the previous steps. The entire weight of the sink should be supported by the support frame. Verify that the sink is in line and level with the top of the cabinet. Use shims, if needed, to level the sink. Set the sink and apply your sealant to ﬁll in any gaps below the sink front, and between the sink and counter-top. Hold the sink in place to secure.