Installation Sheet

2Fireclay Farmhouse Sink Installation Instructions
We recommend undermount sink installation.
Flush-mount and built-up installation are not
recommended.
Ensure there is adequate room for the faucet and
backsplash installations.
INSTALLATION OPTIONS
TEMPLATE AND CUTOUT
Farmhouse sinks may require custom cabinetry. We recommend
consulting an experienced cabinet maker for assistance. Providing the
cabinet maker with the actual sink that is to be installed will ensure a
custom fit.
Allow clearance for the water supply lines, drains and a garbage disposal, if
applicable. Build a support frame or install support bars from front
to back along the inner sides of the cabinet. The frame must support the
weight of the sink and all attachments.
The support frame should be positioned so that when installed, the sink is
in line and level with the top of the cabinet.
Note: It may be necessary to custom scribe the cabinet sides or, if needed,
add wood filler strips to accomodate the slight taper of the apron front.
No template is provided since each sink will vary dimensionally. After
centering the sink, trace the outline of the sink on the counter-top with a
pencil to use as a guide for the cutout. Remember to allow clearance for
any faucets and/or backsplashes. Cut the counter-top accordingly.
PREPARE THE CABINET
FIRECLAY FARMHOUSE SINK INSTALLATION