Installation Sheet

3Fireclay Farmhouse Sink Installation Instructions
FINAL PLACEMENT
Test fit the sink in the opening that was created in the previous steps. The
entire weight of the sink should be supported by the support frame. Verify
that the sink is in line and level with the top of the cabinet. Use shims, if
needed, to level the sink.
Set the sink and apply your sealant to fill in any gaps below the sink front,
and between the sink and counter-top. Hold the sink in place to secure.
Place the counter-top onto the sink and remove any excess sealant from
all surfaces.
DRAIN INSTALLATION
1. Apply a bead of silicone sealant to the base of
the strainer flange.
2. Place the flange in the drain opening in the
kitchen sink.
3. If your drain flange has a disposer flange, use
the dirctions supplied with the garbage disposer
to attach the disposer and complete your
installation.
For drains with strainer baskets, slide the rubber
gasket and friction washer up the strainer flange
to the bottom of the sink.
4. Thread the lock nut onto the drain assembly.
Hand-tighten and make sure that the drain is
properly aligned. Carefully finish tightening 1/4
turn with a basin wrench to secure the drain.
FIRECLAY FARMHOUSE SINK INSTALLATION