Installation Sheet

2Single Hole Faucet Installation Instructions
7. To install the new pop-up drain, apply a bead of silicone sealant to the underside of the drain ange and place it in
the mounting hole. If there is no pop-up drain, move on to step 11.
8. Thread the lock nut onto the drain pipe and tighten with your adjustable wrench.
9. Wipe away any excess sealant around the drain using your damp cloth.
10. Attach the P trap to the drain pipe and wall drain tting, and tighten the lock nuts.
11. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are
tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and
allow the water to ow through the spout for approximately 60 seconds.