Installation Sheet

1Bathroom Mirror Installation Instructions
BATHROOM MIRROR
INSTALLATION INSTRUCTIONS
Before installing, read entire Bathroom Mirror Installation Instructions. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer Service
at 1-866-855-2284. If you need assistance or have questions while installing your mirror, contact Customer
Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom xtures. Signature Hardware
accepts no liability for any damage to the oor, walls or for personal injury during installation.
TOOLS AND MATERIALS:
INSTALLATION
1. With the help of another person, center the mirror above the sink at the appropriate height and mark a line at the top
of the mirror on the wall.
2. Locate and mark the position of the wall studs to which you will fasten your mirror. You can nd studs by listening for
a solid sound as you knock on the wall or by using a stud nder
Tip: If the studs in your bathroom do not line up to the mounting location for your mirror, wood blocking can be
installed between the studs using standard 2 x 4’s. We recommend consulting a professional if you are unfamiliar
with this type of installation.
3. Measure the location of the D rings or keyhole brackets on the back of the mirror to determine the location of your
mounting hardware. Use the top of the mirror as your guideline. Use your level to verify that the mounting hardware
is properly aligned.
4. Drill pilot holes and install the mounting hardware. Because wall construction and materials vary from home to home,
the appropriate mounting hardware may need to be purchased from your local hardware store. Consult a
professional if you are unfamiliar with this type of installation.
5. With the help of another person, hang your mirror by attaching the D rings or keyhole brackets to the mounting
hardware.
Stud Finder Pencil Tape Measure
Level Drill