Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom SinksSignature Hardware Vilas 36" Vitreous China Wall Mounted Sink with Single Faucet Hole

1Wall-Mount Bathroom Sink Installation Instructions

TOOLS AND MATERIALS:

BEFORE INSTALLING

WALL-MOUNT BATHROOM SINK

Read entire installation instructions. Observe

all local building and safety codes.

Unpack and inspect the product for any

shipping damages. If you ﬁnd damages, do not

install. Contact Customer Service at

1-866-855-2284. If you need assistance or

have questions while installing your sink,

contact Customer Service.

Because wall construction and materials vary

from home to home, Signature Hardware does

not provide mounting hardware for all of our

wall-mount sinks. The appropriate mounting

hardware can be purchased from your local

hardware store.

We recommend consulting a professional if

you are unfamiliar with installing bathroom

ﬁxtures. Signature Hardware accepts no

liability for any damage to the ﬂoor, walls,

plumbing or for personal injury during

installation.

Pencil

Level

Screwdriver

Drill

Silicone Sealant

Mounting

Hardware

Stud Finder

Socket Wrench

Basin Wrench

1. If no mounting bracket is provided, place the sink in the

installation location and mark the wall through each of the

mounting holes. For mounting bracket installation move on

to page 2.

Important: The sink should be anchored to solid wood blocking

installed behind the ﬁnished wall. We recommend consulting a

professional if you are unfamiliar with this type of installation.

2. Drill mounting holes for the anchor or lag bolts using the

guides created in the previous step. If the wall is tile, use a

masonry drill bit.

INSTALLATION

3. Install the new faucet and drain assembly according to the

installation instructions.

Summary of content (3 pages)

PAGE 1
WALL-MOUNT BATHROOM SINK BEFORE INSTALLING INSTALLATION Read entire installation instructions. Observe all local building and safety codes. 1. If no mounting bracket is provided, place the sink in the installation location and mark the wall through each of the mounting holes. For mounting bracket installation move on to page 2. Unpack and inspect the product for any shipping damages. If you ﬁnd damages, do not install. Contact Customer Service at 1-866-855-2284.
PAGE 2
4. Secure the sink to the wall with the mounting hardware. After inserting the ﬁrst fastener, verify that the sink is level. When the sink is properly aligned insert the remaining fasteners. 5. Connect the water supply and drain lines. Turn on the water supply to check for any leaking from the water supply lines or sink basin. If a lavatory drain is included, move on to the Drain Installation section. Note: Some wall-mount sinks include a trim piece to cover the plumbing lines.
PAGE 3
Note: Some wall-mount sinks include a trim piece to cover the plumbing lines. These typically attach directly to the wall framing with lag bolts. 6. Connect the water supply and drain lines. Turn on the water supply to check for any leaking from the water supply lines or sink basin. If a lavatory drain is included, move on to the Drain Installation section. DRAIN INSTALLATION 1.