Installation Sheet

3
6. Cut the appropriate amount of the 1 1/2” PVC to
ensure a proper connection into the P-trap under the
floor. Use the PVC primer and cement to secure the
installation to the P-trap.
7. Fill the tub with water to check for any leaks from the
connections. Verify that the drain is working properly.
5. Attach the flanged PVC hub adapter to the exposed
threads on the bottom of the tub. Use a small amount
of silicone on the threads to act as sealant. Allow the
silicone to dry fully.
RESIN TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
8. Finish your installation by running a bead of neutral
cure silicone sealant around the base of the tub where
it meets the floor. Wipe away any excess sealant with a
damp cloth.
P-trap
PVC hub
adapter fitting