Installation Sheet

7
RESIN TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
3. Cut the provided 1 ½” PVC pipe 3” shorter than the
distance between the floor and the p-trap (measure-
ment taken in step two).
4. Apply PVC primer and cement to the outside of the
PVC pipe and to the inside of the p-trap, per manufac-
turer instructions. Insert the pipe firmly into the p-trap
until cement is bonded.
2 3 4 5 6 7
5. Apply PVC primer and cement to the outside of the
PVC pipe and to the inside of the drop-in drain insert.
6. Slide the drop-in drain onto the PVC pipe, using a
twisting motion to ensure proper cement bond, apply
pressure until the cement is fully set. Ensure that the
rim of the drop-in drain sits flush on the sub floor. Act
quickly before cement sets.