Installation Sheet

1Veyo Freestanding Tub Faucet with Hand Shower Installation Instructions
Veyo Freestanding Tub Faucet with Hand Shower
INSTRUCTIONS
TOOLS AND MATERIALS:
Unpack and inspect faucet and parts for
damage. If any damage is found, contact
Customer Service at 1-866-855-2284.
If you need assistance while installing your
new faucet, call our Customer Service
number.
We recommend consulting a professional if
you are unfamiliar with installing bathroom
fixtures and plumbing. Signature
Hardware accepts no liability for any
damage to the floor, walls, plumbing, or
personal injury during installation.
Caution: Do not grab or hold on to faucet or
risers for support.
BEFORE INSTALLING INSTALLATION
Before you begin, read the installation
instructions below. Observe all local
plumbing and building codes.
For the following installation instructions for
your new Freestanding Tub Faucet it is
assumed that the water supply lines
are in place and directly accessible for
faucet installation.
3mm
Hex Wrench*
12mm
Hex Wrench*
*Note*
Water line rough-in connections should be flush with the floor.
1. Attach the provided 1/2" pipe nipples to the water
supply at the floor with 12mm hex wrench, then secure
with provided screws.
2. Slide the decorative escutcheons onto the top of the
riser pipes.
*not included
Screws