Installation Sheet

7
New York Widespread Faucet Installation Instructions
NEW YORK WIDESPREAD FAUCET INSTALLATION
5. Position the drain so that the lever is facing the back
of the fixture, in line with the faucet’s lift rod. While
holding in place, hand tighten the lock nut until secure
then finish tightening with a basin wrench. Be careful
not to overtighten, which can crack a fragile sink.
Hand tighten
lock nut
underneath sink
6. If not already installed, insert the faucet’s lift rod into
its designated hole on the back of the faucet.
7. Use the link to attach the faucet’s lift rod to the drain
lever. Pinch the metal clip located on the drain lever to
remove. Slide one end of the clip back onto the lever,
followed by the link, then the second end of the clip to
secure.