Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsShop All Signature HardwareSignature Hardware Watts 1.75 GPM Non-Mixing Double Tap Kitchen Faucet with Brass Wheel Handles
12
WATTS WALL-MOUNT NON-MIXING KITCHEN FAUCET
INSTALLATION
INSTALLATION
3. Attach each of the faucet spouts and valves to the
installed faucet couplers. Tighten firmly using an
adjustable wrench. Tip: Wrap the nuts with a cloth
before tightening to avoid scratching the decorative
finish.
4. Once installation is complete, remove the aerators
from the faucet spouts and turn each spout on to
remove any dust or loose sediment within the water
lines. Check for any leaks. Allow water to flow for 60
seconds. Reattach the aerators.
1. To prepare for faucet installation, two 1/2” IPS
female fittings should be installed behind the finished
wall.
2. Attach the faucet couplers to the installed female
fittings. Apply plumber’s tape or thread sealant to the
threads before tightening. Tighten firmly.
2Watts Wall-Mount Non-Mixing Kitchen Faucet Installation Instructions