Installation Sheet

1Cooper Bathroom Shelf Installation Instructions
COOPER BATHROOM SHELF INSTALLATION
TOOLS AND MATERIALS:
We recommend consulting a professional if you are
unfamiliar with installing this type of product. Signa-
ture Hardware accepts no liability for any damage to
the home, product, or for personal injury during
installation.
Unpack and inspect the product for any shipping
damages. If you find damages, do not install. Contact
Customer Relations at 1.866.855.2284.
Observe all local plumbing and building codes.
BEFORE INSTALLING
INSTALLATION
1. Position the mounting template on the wall at the desired
installation location (Figure 1). Hold the mounting brackets
in their location at each end of the template, and mark the
location of the mounting holes. Make two marks in each
slot, as each mounting bracket will require two screws.
Ensure that the mounting template is level before making
marks.
2. Set all hardware aside. Drill a pilot hole into the wall at each
marked mounting hole location.
Important: If drilling through tile, you must use a masonry
drill bit to avoid cracking the tile.
Drill
Phillips
Screwdriver
Hex Wrench
Level
Drill Bit
Figure 1
Figure 2
3. Insert anchors into the drilled holes. Fasten the mounting
brackets to the wall, as shown, using the provided screws
(Figure 2).
4. Install the shelf onto the installed mounting brackets.
Fasten the shelf by tightening the set screw on each end , as
shown (Figure 2).
mounting
template
mounting
bracket
hole
slot
hole
anchor
screw
set screw
hex
wrench
shelf
SKU(s): 940976