Installation Sheet

4
6. At each of the bolt holes in the counter top, attach
sink clips by placing the long end of the bracket flat
against the sink lip. Screw the wing bolts through the
brackets and bolt holes and tighten.
5. Carefully place the sink upside down on the counter
top, positioning it within your marked outline. Once
positioned, press firmly into place.
7. Carefully turn the counter top and sinks over. If
needed, reposition the sinks by slightly loosening the
wing bolts and adjusting.
8. Wipe away any excess sealant with a damp cloth,
and allow the sealant to dry. Once the sealant is dry,
proceed to Step 3.
SINGLE BOWL UNDERMOUNT VANITY
Single Bowl Undermount Vantiy Installation Instructions