Installation Sheet

ManualsBrandsSignature Hardware ManualsMirrors and Medicine CabinetsSignature Hardware Fleming 20" W x 28" H Rectangular LED Lighted Frameless Bathroom Mirror

LED-LIGHTED BATHROOM MIRROR INSTALLATION

GETTING STARTED

BEFORE YOU BEGIN

A professional is required to complete the wiring for the

mirror’s light. Consult a licensed electrician. Signature

Hardware accepts no liability for any damage to the

home, product, or for personal injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the items for damage. If any

damage is found, contact our Customer Relations team

at 1-866-855-2284.

Ensure that you have gathered all of the required

materials that are needed for the installation.

Because the speciﬁcation measurements are

approximate and slight variations may occur, we highly

recommend waiting until the mirror is on-site before

starting rough-in procedures.

TOOLS AND MATERIALS:

1LED-Lighted Bathroom Mirror Installation Instructions

Pencil

Tape Measure

Level

Drill

Stud Finder

Summary of content (3 pages)

PAGE 1
LED-LIGHTED BATHROOM MIRROR INSTALLATION BEFORE YOU BEGIN A professional is required to complete the wiring for the mirror’s light. Consult a licensed electrician. Signature Hardware accepts no liability for any damage to the home, product, or for personal injury during installation. TOOLS AND MATERIALS: Level Drill Tape Measure Observe all local plumbing and building codes. Unpack and inspect the items for damage. If any damage is found, contact our Customer Relations team at 1-866-855-2284.
PAGE 2
LED-LIGHTED BATHROOM MIRROR INSTALLATION WIRING DIAGRAM brown/black live brown/black yellow/green earth yellow/green blue/white neutral blue/black/white INSTALLATION (NO MOUNTING BRACKET) 1. Center the mirror above the sink at the appropriate height and draw a leveled outline of your cabinet on the wall. 2. Locate and mark the position of the wall studs to which you will fasten your mirror. You can ﬁnd studs by listening for a solid sound as you knock on the wall or by using a stud ﬁnder.
PAGE 3
LED-LIGHTED BATHROOM MIRROR INSTALLATION 3. Secure the mirror to the wall studs with the mounting hardware (provided). Make sure that your mirror is level. INSTALLATION (WITH MOUNTING BRACKET) 1. Center the mirror above the sink at the appropriate height and draw a leveled outline of your cabinet on the wall. 2. Locate and mark the position of the wall studs to which you will fasten your mirror. You can ﬁnd studs by listening for a solid sound as you knock on the wall or by using a stud ﬁnder.