Installation Sheet

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing ﬁxtures. Signature Hardware

accepts no liability for any damage to the hook or for

personal injury during installation.

Read entire Edison Robe Hook Installation Instructions.

Observe all local building and safety codes.

Unpack and inspect the product for any shipping

damages. If you ﬁnd damages, do not install. Contact

Customer Service at 1-866-855-2284. If you need

assistance or have questions while installing your robe

hook, contact Customer Service.

We recommend consulting a professional if you are

unfamiliar with installing bathroom ﬁxtures. Signature

Hardware accepts no liability for any damage to the ﬂoor,

walls or for personal injury during installation.

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

EDISON

TOWEL BAR INSTALLATION INSTRUCTIONS

REVISED 03/11/2019

Pencil

Screwdriver

Drill

Stud Finder

TOOLS AND MATERIALS:

PAGE 1
EDISON TOWEL BAR INSTALLATION INSTRUCTIONS TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing ﬁxtures. Signature Hardware accepts no liability for any damage to the hook or for personal injury during installation. Screwdriver Read entire Edison Robe Hook Installation Instructions. Observe all local building and safety codes. Unpack and inspect the product for any shipping damages. If you ﬁnd damages, do not install.
PAGE 2
EDISON TOWEL BAR INSTALLATION INSTRUCTIONS INSTALLATION 1. Determine the installation location and mark the wall through each of the mounting holes in the towel bar. 2. Drill the screw holes with the appropriate drill bit for the wall surface or material. Note: We recommend anchoring any ﬁxtures that will bear weight to wall studs or solid wood blocking. If the studs in your bathroom do not line up to the mounting location, wood blocking can be installed between the studs using standard 2 x 4’s.