Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsShop All Signature HardwareSignature Hardware Lander 24" Single Vanity Set with Solid Wood Cabinet and Vitreous China Vanity Top with Rectangular Integrated Vitreous China Sink - 4" Faucet Holes
123
2Trough Sink Vanity Installation Instructions
TROUGH SINK VANITY INSTALLATION
INSTALLATION
STEP 1: CABINET INSTALLATION
1. Determine the location where you would like to
install your vanity.
2. Locate and mark the location of the studs to which
you will fasten your vanity. You can locate studs by using
a stud finder.
Important: If the studs in your bathroom do not line up
to the mounting location for your vanity, wood blocking
can be installed between the studs using standard
2 x 4’s. If the wood blocking needs to be installed behind
the finished wall, we recommend consulting a
professional if you are unfamiliar with this type of
installation.
3. Place the vanity in the installation location. Verify
that the vanity cabinet is level. If the vanity is not level,
adjust the feet (if applicable) or use wooden shims to
adjust it as necessary.
4. Attach the vanity to the wall by screwing through the
back of the vanity cabinet. Use the marked stud
locations as a guideline. Proceed to step 2 for attaching
your sink.
SCREWS SCREWS
WALL STUDS
MOUNTING RAIL