Installation Sheet

1
1.800.221.3379
HIBISCUS
ACRYLIC FREESTANDING TUB
BAÑERA NO EMPOTRADA ACRÍLICA HIBISCUS
SKU: 948058, 948057, 948247, 948248
GETTING STARTED
BEFORE YOU BEGIN NOTE
NOTA
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the
plumbing, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the tub for shipping damage. If
any damage is found, contact our Customer
Relations team at 1-800-221-3379.
Ensure that you have gathered all the required
materials that are needed for the installation.
Ensure that your bathroom floor is adequately
supported, and the finished floor is level.
TOOLS AND MATERIALS:
HERRAMIENTAS Y MATERIALES:
ANTES DE COMENZAR
Le recomendamos que consulte a un profesional si no
sabe cómo instalar accesorios de plomería. Signature
Hardware no asume ninguna responsabilidad por
daños causados a la tubería, ni por daños personales
durante la instalación.
Cumpla con todas las normas locales de plomería y
construcción.
Retire la bañera del empaque y verifique si se
produjeron daños durante el envío. Si encuentra algún
daño, comuníquese con nuestro equipo de Servicios al
cliente al 1-800-221-3379.
CÓMO COMENZAR
Asegúrese de haber reunido todos los materiales
necesarios para la instalación. Asegúrese de que el
suelo del baño tenga el apoyo adecuado, y que el
suelo terminado esté nivelado.
Damp Cloth
Paño húmedo
Pencil
Lápiz
Silicone Sealant
(100% Neutral Cure)
Sellador de silicona
(100% curado neutro)
Tape Measure
Cinta métrica
Level
Nivelador
Safety Glasses
Gafas de seguridad
Pipe Wrench
Llave de tubo
For Warranty information, please visit: signaturehardware.com/services/warranty
Para obtener información sobre la garantía, visite: signaturehardware.com/services/warranty
If drilling for deck mounted faucet, using flexible
connections for water supply is recommended. There
is an access panel on the back side of the tub to make
installation easier. Place the faucet in the desired
location, ensuring that the faucet will not interfere with
the drain. Mark the centerlines of the faucet for drilling.
Refer to the installation instructions provided by
faucet manufacturer to determine faucet hole size.
Si perfora para montar el grifo en la superficie, se
recomienda que utilice conexiones flexibles para el
suministro de agua. Existe un panel de acceso en la parte
posterior de la bañera para facilitar la instalación.
Coloque el grifo en la posición deseada y asegúrese de
que no interfiera con el desagüe. Marque las líneas
centrales del grifo para realizar la perforación. Consulte
las instrucciones de instalación que proporciona el
fabricante para determinar el tamaño del orificio para el
REVISED 03/25/2020
CODES: CG-DID-1_1/2-V2-PCV-HW
SHHBFSO5930, SHHBFSO6731
SHHBFSR5930, SHHBFSR6731
SHHBFSOT5930, SHHBFSOT6731
SHHBFSRT5930, SHHBFSRT6731

Summary of content (13 pages)