Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Hibiscus Thermostatic Valve Trim - 1/2" Rough In Valve Included

1.800.221.3379

HIBISCUS

THERMOSTATIC SHOWER VALVE

VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS

SKU: 948558

REVISED 02/03/2020

CODES: SHHB9009, SH6004, SH6006

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are



Hardware accepts no liability for any damage to the

plumbing, wall, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping

damage. If any damage is found, contact our

Customer Relations team at 1-800-221-3379.

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

HERRAMIENTAS Y MATERIALES:

ANTES DE COMENZAR

Le recomendamos que consulte a un profesional si no

sabe cómo instalar accesorios de plomería. Signature

Hardware no asume ninguna responsabilidad con

respecto a los daños causados a la plomería, la pared, ni

por daños personales que ocurran durante la

instalación.

Cumpla con todas las normas locales de plomería y

construcción.

Retire el producto del empaque y veriﬁque si no sufrió

daños durante el envío. Si encuentra algún daño,

comuníquese con nuestro equipo de Servicio al cliente

al 1-800-221-3379.

CÓMO COMENZAR

Asegúrese de haber reunido todos los materiales

necesarios para la instalación.

Long-nose Pliers

Pinzas de punta

Pliers

Pinzas

de punta



Llave hexagonal

Safety Glasses

Gafas de seguridad

Adjustable Wrench

Llave Ajustable

Phillips

Screwdriver

Destornillador

Phillips

Plumbers Tape

Cinta Selladora

Para Rosca

Summary of content (8 pages)

PAGE 1
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 BEFORE YOU BEGIN TOOLS AND MATERIALS: HERRAMIENTAS Y MATERIALES: We recommend consulting a professional if you are unfamiliar with installing plumbing �xtures. Signature Hardware accepts no liability for any damage to the plumbing, wall, or for personal injury during installation. Plumbers Tape Cinta Selladora Para Rosca Observe all local plumbing and building codes.
PAGE 2
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 BEFORE INSTALLATION ANTES DE LA INSTALACIÓN 4. If inlet conditions di�er from those used during factory calibration, it may be necessary to re-calibrate the valve after installation. The installer must check the mixed �ow temperature after installation, and adjust the valve as needed according to the instructions. 1.
PAGE 3
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 1-5/8” to 2-3/8” 4,12 cm a 6,03 cm 2"”(52mm) supply pipe tubo de suministro 1/2-14NPT 1/2-14NPT 3-3/4"(95.5mm) cold fría wall pared 7/8"(23mm) 2-1/8"(54mm) 2-1/2"(65mm) 5-1/2" (140mm) 32” (813mm) 5-1/2"(140mm) 1-5/8"(41.5mm) 44” (1118mm) 1/2-14NPT 5-1/2"(140mm) �oor piso 2"(52mm) 3-1/8"(80mm) 3/4-14NPT 3/4-14NPT 3/4-14NPT 3 3-3/4"(96mm) 1-5/8"(42mm) 5-1/2"(140mm) 2-1/2"(65.
PAGE 4
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 VALVE INSTALLATION INSTALACIÓN DE LA VÁLVULA CHECK TEMPERATURE SETTING COMPROBACIÓN DE LA CALIBRACIÓN DE TEMPERATURA 1. Shut o� the main water supply. Flush all pipes thoroughly before installation. 1. The valve is calibrated at the factory to deliver water at the temperature range from 65°F-145°F. 1. Cierre el suministro principal de agua. Drene completamente todas las tuberías antes de la instalación. 1.
PAGE 5
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 TRIM INSTALLATION INSTALACIÓN DEL REGULADOR 2. Remove the o-ring (1) from �tted joint (2). Put the �tted joint (2) through installation plate (4) and secure with o-ring (1). Then put the long screws (3) through installation plate (4) and tighten on the valve underbody. 1.
PAGE 6
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 4. Install the handle assembly on the handle base and tighten set screw with allen wrench (Hex: 2.5mm) provided. The button should be in the 12 o'clock position. If you want to get hotter water, you can press the button and turn handle counterclockwise to adjust the temperature. 4. Position escutcheon on installation plate with drain hole at the bottom.
PAGE 7
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 REMOVAL OF CARTRIDGE FOR MAINTENACE MANTENIMIENTO DE DESMONTAJE DE CAMBIO DE CARTUCHO 4. Unscrew the cartridge by wrench by turning counterclockwise using adjustable wrench. 4. Desenrosque el cartucho con una llave ajustable girando hacia la izquierda. 1. This thermostatic valve has screens to prevent dirt from damaging the valve. Clogged screens can cause reduced �ow and ine�cient temperature mixture by the valve. 5.
PAGE 8
HIBISCUS THERMOSTATIC SHOWER VALVE VÁLVULA DE DUCHA TERMOSTÁTICA HIBISCUS SKU: 948558 CARE INSTRUCTIONS INSTRUCCIONES DE CUIDADO To preserve the �nish of your product, apply non-abrasive wax. Any cleaners should be rinsed o� immediately. Do not use abrasive cleaners on the product. Para conservar el acabado del producto, aplique cera no abrasiva. Cualquiera sea el tipo de limpiador que se utilice, se debe enjuagar inmediatamente. No use limpiadores abrasivos en el producto. 8 1.800.221.