Specification Sheet

PROVINCETOWN

FREESTANDING TUB FILLER

SKU: 948664

1.800.221.3379

REVISED 01/15/2020

FEATURES

Spout max. ﬂow rate: 8 gpm (30 L/min) @ 60 psi.

Hand shower max. ﬂow rate: 1.8 gpm (6.8 L/min) @ 80 psi.

Single function hand shower (full spray).

Integral diverter to hand shower.

Handshower includes factory installed backﬂow prevention

check valve.

Optional rough-in valve includes stops.

Underﬂoor access is required for proper installation.

Installation on an existing concrete slab will require

cutting and concrete removal.

SIGNATURE HARDWARE Lifetime Warranty

See website for detailed warranty information.

CONTENTS

TUB FILLER

VALVE

PAGE 2

PAGE 3

..................

PAGE 1
P R O V I N C E TO W N FREESTANDING TUB FILLER SKU: 948664 FEATURES Spout max. ﬂow rate: 8 gpm (30 L/min) @ 60 psi. Hand shower max. ﬂow rate: 1.8 gpm (6.8 L/min) @ 80 psi. Single function hand shower (full spray). Integral diverter to hand shower. Handshower includes factory installed backﬂow prevention check valve. Optional rough-in valve includes stops. Underﬂoor access is required for proper installation. Installation on an existing concrete slab will require cutting and concrete removal.
PAGE 2
P R O V I N C E TO W N FREESTANDING TUB FILLER SKU: 948664 9-1/8" (232 mm) 10-1/2" (266 mm) 8-5/8" (219 mm) 2-1/4" (57 mm) 8-1/2" (216 mm) 1-3/4" (44 mm) 4" (102 mm) 42-1/4" (1073 mm) 39" (990 mm) 29" (736 mm) 31-1/2" (800 mm) 58" Hose length 5-7/8" (149 mm) FEATURES Installation Type: Freestanding Handle Type: Lever Features: Hand Shower Included Tub Faucet Material: Brass Length: 9-1/8" Width: 10-1/2" Height: 42-1/4" Height To Spout: 39" Height to Control Valve: 31-1/2" Spout Reach: 8-5/8" Spou
PAGE 3
F R E E S TA N D I N G OPTIONAL TUB FAUCET ROUGH-IN VALVE SKU: 446521 4-1/2" (114 mm) 4-1/4" (108 mm) HOT 1/2" NPT COLD 3" (76 mm) Finish Floor Min: 1-5/8" Finish Floor Max: 4-5/8" FEATURES Material: Brass Length: 3-1/2" Width: 3-5/8" Height: 5-1/8" Finish Floor Min: 1-5/8" Finish Floor Max: 4-5/8" NPT Connection: 1/2" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary.