Installation Sheet

7
1.800.221.3379
8. Turn the tub to upright position. Prepare the drain to
be connected to the male PVC pipe rough-in above
floor level.
8. Voltee la bañera a la posición vertical. Prepare el
drenaje que se conectará a la instalación de la tubería
macho de PVC por encima del nivel del suelo.
9. Center tub directly over PVC rough-in, adhere tub
onto PVC pipe.
NOTE: Unscrew the pop up mechanism and drain
cover to get a better view of the male PVC rough-in.
9. Centre la bañera directamente sobre la instalación de
PVC, adhiera la bañera sobre la tubería de PVC.
NOTA: Desenrosque el mecanismo accionable y la
cubierta del drenaje para tener una mejor vista de la
instalación de la tubería macho de PVC.
10. Fill the tub with water to check for any leaks from
the connections. Verify that the drain is working
properly.
10. Llene la bañera con agua para verificar si existen
fugas en las conexiones. Verifique que el drenaje
funcione correctamente.
ACRYLIC FREESTANDING TUB
BAÑERA NO EMPOTRADA ACRÍLICA
SKU: 948057, 948058, 948059, 949042, 949093, 948247, 948248
11. Finish your installation by running a bead of neutral
cure silicone sealant around the base of the tub where
it meets the floor. Wipe away any excess sealant with a
damp cloth.
11. Termine su instalación aplicando un reborde de
sellador de silicona de curado neutro alrededor de la
base de la bañera, donde se junta con el piso. Limpie el
exceso de sellador con un trapo húmedo.