Installation Sheet

8
1.800.221.3379
ACRYLIC FREESTANDING TUB
BAÑERA NO EMPOTRADA ACRÍLICA
SKU: 948057, 948058, 948059, 949042, 949093, 948247, 948248
CLEANING
Wash your tub using a gentle soap, such as
dishwashing liquid, and warm water. Do not use any
abrasive cleaning pads or materials. We recommend
the use of a soft sponge or microfiber washcloth.
Vinegar can be used to remove hard water buildup and
mildew. Rinse with warm water and dry with a clean,
soft cloth. To maintain the glossy tub finish, we
recommend buffing your tub every three months with
white polishing compound. Do not use metal scrapers,
wire brushers or other harsh abrasive tools.
SCRATCH REMOVAL
1. Using a damp sponge, wash the area with warm
water and dish washing liquid. Rinse thoroughly with
warm water.
2. Do not use any type of abrasive cleaning pads or
chemicals. Read the labels on your cleaners to be sure
they are gentle enough to be used on your acrylic tub.
3. Apply circular, even strokes to the scratched area
using dampened 800 and 1200 grit sandpaper.
4. Wipe the area clean with a damp sponge and rinse
thoroughly.
5. Apply an acrylic polishing compound and water with
a soft, clean cloth. Rub in a circular motion to polish
and buff the area.
6. Wipe off any excess residue and rinse the tub with
warm water. Dry the surface with a clean, soft cloth.
LIMPIEZA
Limpie su bañera con un detergente suave, como un
detergente para lavavajillas, y agua tibia. No utilice
ninguna esponja o material de limpieza abrasivos.
Recomendamos el uso de una esponja suave o un paño
de microfibra. Se puede utilizar vinagre para remover
moho y acumulación de agua calcárea. Enjuague
con agua tibia y seque con un paño limpio y suave. Para
mantener brillante el acabado de la bañera,
recomendamos pulirla cada tres meses con un
compuesto de pulido blanco.
CÓMO ELIMINAR RAYONE
1. Con una esponja mojada, limpie el área con agua
tibia y detergente para lavavajillas. Enjuague
completamente con agua tibia.
2. No utilice ningún tipo de esponjas o productos
químicos de limpieza abrasivos. Lea las etiquetas de sus
limpiadores para asegurarse de que sean lo
suficientemente suaves para utilizar en su bañera de
acrílico.
3. Aplique movimientos circulares y uniformes al área
rayada usando papel de lija de grano 800 y 1200.
4. Seque el área limpia con una esponja húmeda y
enjuague completamente.
5. Aplique un compuesto de pulido de acrílico y agua
con un paño suave y limpio. Frote con movimientos
circulares para pulir y lustrar el área.
6. Limpie los residuos y enjuague la bañera con agua
tibia. Seque la superficie con un trapo limpio y suave.
MANTENIMIENTO
No se recomienda el uso de aceites y sales de baño,
debido a la dificultad para la limpieza de los sistemas, y al
hacerlo anulará la garantía del consumidor.
MAINTENANCE
The use of bath oils and bath salts is not recommend-
ed due to the difficulty in cleaning the systems and
doing so will void the consumer's warranty.