Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Rigi Pressure Balanced Tub and Shower Trim Package - Rough In Included

1.800.221.3379

RIGI

PRESSURE BALANCE SHOWER SET

REGULADOR DE SET DE DUCHA DE PRESIÓN BALANCEADA RIGI

SKU: 948674, 948667

REVISED 10/25/2019

CODES: SHRI8020G, SHRI8030G

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

plumbing, wall, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping

damage. If any damage is found, contact our

Customer Relations team at 1-800-221-3379.

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

HERRAMIENTAS Y MATERIALES:

ANTES DE COMENZAR

Le recomendamos que consulte a un profesional si no

sabe cómo instalar accesorios de plomería. Signature

Hardware no asume ninguna responsabilidad con

respecto a los daños causados al inodoro, sistema de

plomería, suelo o daños personales durante

la instalación.

Cumpla con todas las normas locales de plomería y

construcción.

Retire el inodoro del empaque y veriﬁque si se

produjeron daños durante el envío. Si encuentra algún

daño, comuníquese con nuestro equipo de Servicio al

cliente al 1-800-221-3379.

CÓMO COMENZAR

Asegúrese de haber reunido todos los materiales

necesarios para la instalación.

Safety Glasses

Gafas de seguridad

Adjustable Wrench

Llave Ajustable

Phillips

Screwdriver

Destornillador

Phillips

Tape Measure

Cinta métrica

Plumbers Tape

Cinta Selladora

Para Rosca

Summary of content (3 pages)

PAGE 1
RIGI PRESSURE BALANCE SHOWER SET REGULADOR DE SET DE DUCHA DE PRESIÓN BALANCEADA RIGI SKU: 948674, 948667 BEFORE YOU BEGIN TOOLS AND MATERIALS: HERRAMIENTAS Y MATERIALES: We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, wall, or for personal injury during installation. Safety Glasses Gafas de seguridad Observe all local plumbing and building codes.
PAGE 2
RIGI PRESSURE BALANCE SHOWER SET REGULADOR DE SET DE DUCHA DE PRESIÓN BALANCEADA RIGI SKU: 948674, 948667 INSTALLATION INSTALACIÓN 3. Insert the long end of the shower arm (2) through the ﬂange (1), and wrap plumbers’ tape around the long end of the shower arm (2) in a clockwise direction, as shown. Screw long end of the shower arm into pipe elbow inside the wall. 1. Screw nut (1) onto thread section of valve body. Insert the brass stem extension (2) to valve body. Tighten screw (3). 3.
PAGE 3
RIGI PRESSURE BALANCE SHOWER SET REGULADOR DE SET DE DUCHA DE PRESIÓN BALANCEADA RIGI SKU: 948674, 948667 5a. Flushing For Shower Only: Turn on hot and cold water supply lines allowing water to ﬂow from shower outlet (1) until all foreign matter has cleared the line. Pressure must be approximately equal on both hot and cold sides for valve to function properly. 4. Install tub spout.