Specification Sheet

ManualsBrandsSignature Hardware ManualsPlumbingKey West 1.8 GPM Multi Function Shower Head with 5-3/4" Wall-Mounted Shower Arm

1.800.221.3379

REVISED 01/15/2020

FEATURES

Shape: Round

Assembly Required: No

Installation Type: Wall

Shower Head Spray: Multi-Function

Shower Arm Included: Yes

Shower Head Swivel: Yes

5 Function Shower Head (Aerated, Aerated/Spray,

Spray, Massage/Spray, Massage)

Escutcheon Included

Easy Clean Rubber Nozzles

Shower Head Flow Rate: 1.8 gpm (6.8L/min) max @ 80 psi

SIGNATURE HARDWARE Lifetime Warranty

See website for detailed warranty information.

CONTENTS

SHOWER HEAD

SHOWER ARM

PAGE 2

PAGE 3

..................

KEY WEST

MULTIFUNCTION SHOWER HEAD WITH SHOWER ARM

SKU: 949064

Summary of content (3 pages)

PAGE 1
KEY WEST MULTIFUNCTION SHOWER HEAD WITH SHOWER ARM SKU: 949064 FEATURES Shape: Round Assembly Required: No Installation Type: Wall Shower Head Spray: Multi-Function Shower Arm Included: Yes Shower Head Swivel: Yes 5 Function Shower Head (Aerated, Aerated/Spray, Spray, Massage/Spray, Massage) Escutcheon Included Easy Clean Rubber Nozzles Shower Head Flow Rate: 1.8 gpm (6.8L/min) max @ 80 psi SIGNATURE HARDWARE Lifetime Warranty See website for detailed warranty information. CONTENTS SHOWER HEAD ...........
PAGE 2
KEY WEST MULTIFUNCTION SHOWER HEAD SKU: 949064 1/2” (13 mm) 3-1/8" (79 mm) 4-1/2" (114 mm) FEATURES Material: ABS Diameter: 4-1/2" Height: 3-1/8" IPS: 1/2" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 WaterSense CEC Listed Cal Green Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. SIGNATURE HARDWARE LIFETIME WARRANTY See website for warranty information PAGE 2 Code: SHSH2030GBN SHSH2030GCP/SHSH2030GPN 1.
PAGE 3
K E Y W E ST SHOWER ARM SKU: 949064 2-3/8" (60 mm) 2-3/16" (55 mm) 3/8" (10 mm) 3" (76 mm) 13/16" (21 mm) 1/2" (13 mm) -14NPT 2-3/8" (60 mm) 45° 1/2" (13mm) -14NPT FEATURES Material: Brass Length: 5-3/4" Height: 2-3/16" Base Plate Height: 2-3/8" Base Plate Width: 2-3/8" IPS: 1/2" 5-3/4" (146 mm) CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 SIGNATURE HARDWARE LIFETIME WARRANTY See website for warranty information COMPONENT All dimensions and specifications are nominal and may vary.