Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Boca Raton 4-3/4" Tub Spout

1.800.221.3379

BOCA RATON

TUB SPOUT

GRIFO DE BAÑERA

SKU: 948697, 949106

REVISED 12/13/2019

CODES: SHTS93, SHTS92

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

plumbing, tub, wall, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the faucet for shipping damage.

If any damage is found, contact our Customer

Relations team at 1-800-221-3379.

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

HERRAMIENTAS Y MATERIALES:

Adjustable

Wrench

Llave

ajustable

Plumbers

Tape

Cinta de

fontanería

ANTES DE COMENZAR

Le recomendamos que consulte a un profesional si no

sabe cómo instalar accesorios de plomería. Signature

Hardware no asume ninguna responsabilidad con

respecto a los daños causados a la plomería, bañera,

pared, ni por daños personales que ocurran durante la

instalación.

Cumpla con todas las normas locales de plomería y

construcción.

Retire el inodoro del empaque y veriﬁque si se

produjeron daños durante el envío. Si encuentra algún

daño, comuníquese con nuestro equipo de Servicio al

cliente al 1-800-221-3379.

CÓMO COMENZAR

Asegúrese de haber reunido todos los materiales

necesarios para la instalación.

Summary of content (3 pages)

PAGE 1
B O C A R AT O N TUB SPOUT GRIFO DE BAÑERA SKU: 948697, 949106 BEFORE YOU BEGIN TOOLS AND MATERIALS: HERRAMIENTAS Y MATERIALES: We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, tub, wall, or for personal injury during installation. Plumbers Tape Cinta de fontanería Observe all local plumbing and building codes. Unpack and inspect the faucet for shipping damage.
PAGE 2
B O C A R AT O N TUB SPOUT GRIFO DE BAÑERA SKU: 948697, 949106 INSTALLATION INSTALACIÓN 2a. Installation on 1/2" copper pipe (5/8" OD): slip on installation over 1/2" copper pipe: back out set screw in bottom of spout to allow spout to slide on stub out pipe. With the spout tight to the wall, tighten the set screw to the pipe. 1. The stub out 5/8” pipe should extend a minimum of 2” from the wall, but not to exceed 3” from the wall. Remove all burs and sharp edges from the stub out 5/8” pipe.
PAGE 3
B O C A R AT O N TUB SPOUT GRIFO DE BAÑERA SKU: 948697, 949106 2b. Threaded installation with 1/2" steel or brass pipe (7/8" OD): apply plumbers tape on the pipe nipple threads. Before installing spout, remove the adapter assembly (including plastic adapter, plastic washer, O-Ring) by backing out the set screw and pulling out the copper tube adapter assembly. With the spout tight to the wall, tighten the set screw to the pipe. 2b.