Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware St. Martin Dual Function Pressure Balanced Valve Trim - Less Valve

1.800.221.3379

ST. MARTIN

PRESSURE BALANCE SHOWER VALVE

SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN

SKU: 948310

REVISED 12/11/2019

CODES: SHSM8010, SH4001

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

plumbing, shower, wall, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping

damage. If any damage is found, contact our

Customer Relations team at 1-800-221-3379.

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

HERRAMIENTAS Y MATERIALES:

ANTES DE COMENZAR

Le recomendamos que consulte a un profesional si no

sabe cómo instalar accesorios de plomería. Signature

Hardware no asume ninguna responsabilidad con

respecto a los daños causados a la plomería, la ducha,

la pared, ni por daños personales que ocurran durante

la instalación.

Cumpla con todas las normas locales de plomería y

construcción.

Retire el producto del empaque y veriﬁque si se

produjeron daños durante el envío. Si encuentra algún

daño, comuníquese con nuestro equipo de Servicio al

cliente al 1-800-221-3379.

CÓMO COMENZAR

Asegúrese de haber reunido todos los materiales

necesarios para la instalación.

Adjustable Wrench

Llave Ajustable

Flathead

Screwdriver

Destornillador de

cabeza plana

Phillips

Screwdriver

Destornillador

Phillips

Safety Glasses

Gafas de seguridad

Keyhole Saw

Sierra de punta

Tape Measure

Cinta métrica

Neutral Cure

Silicone Sealant

Sellador de silicona

de curado neutro

Plumbers Tape

Cinta Selladora

Para Rosca

Thermometer

Termómetro

Strap Wrench

Llave de correa

Pliers

Pinzas

de punta

Summary of content (10 pages)

PAGE 1
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 BEFORE YOU BEGIN TOOLS AND MATERIALS: HERRAMIENTAS Y MATERIALES: We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, shower, wall, or for personal injury during installation. Observe all local plumbing and building codes.
PAGE 2
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 Copper (Soldering)/ Cobre (Soldar) If you are replacing your plumbing valve, please review the common plumbing methods illustrated below (Copper, IPS). Remove the existing handle and valve trim before replacing your valve. Please follow all local building and plumbing codes. Si estás cambiando tu válvula de plomería, consulta los dos métodos comunes que aparecen más abajo (Cobre, IPS).
PAGE 3
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 VALVE INSTALLATION INSTALACIÓN DE LA VÁLVULA 3a. Thin Wall Installation: Are usually built up with materials such as ﬁberglass tub surrounds and will be the main source of support for the valve. The plaster guard (1) remains attached to the valve. 1. Shut oﬀ the water supply. 3a.
PAGE 4
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 6. With Tub Outlet: Wrap plumbers’ tape around the pipe threads in a clockwise direction. Connect the hot and cold water supply lines (1), the shower outlet pipe (2), and tub outlet pipe (3) by threading them onto the valve body (5) in a clockwise direction. Tighten the pipes to the valve body (5) with a pipe wrench. Connect the pipe elbows (4) to the end of the shower outlet and tub outlet pipes. 4.
PAGE 5
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 7. With No Tub Outlet: Wrap plumbers’ tape around the pipe threads in a clockwise direction. Connect the hot and cold water supply lines (1), the shower outlet pipe (2) by threading them into the valve body (4) in a clockwise direction. Then insert the plug (5) into the bottom of the valve body (4). Tighten the pipes to the valve body (4) with a pipe wrench.
PAGE 6
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 9. Use two 1/2" iron pipe plugs to seal both shower outlet and tub spout outlet. Turn cartridge stem counterclockwise to full on mixed position. Turn on hot and cold water lines to full open position for one minute each. Check for leaks. Shut oﬀ water at faucet. Slowly remove pipe plugs from tub and shower outlets to relieve pressure. 10.
PAGE 7
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 13. Rotate the lever counterclockwise until the water is to the maximum desired temperature, not to exceed 120 degrees F/49 degrees C. Seasonal maintenance of the maximum outlet temperature may be required due to changes in groundwater temperature. 12. Before adjusting the temperature, remove the plastic cap (1) from the valve body (2) by twisting the cap in a clockwise direction. 12.
PAGE 8
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 15. For colder water, adjust the limit stop ring (1) in a clockwise direction and reinstall the limit stop ring (1) onto the cartridge assembly (2). For hotter water, adjust the limit stop ring (1) in a counterclockwise direction and reinstall the limit stop ring (1) onto the cartridge assembly (2). 14.
PAGE 9
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 INSTALLATION INSTALACIÓN 16. If faucet leaks from spout, shut oﬀ the water supplies and replace the cartridge (1). Note: Install cartridge (1) correctly for proper handle rotation. 2. Secure parts as shown below. 2. Segure las piezas como se muestra abajo. 16. Si el grifo gotea en la llave, cierre las líneas de suministro de agua y reemplace el cartucho (1).
PAGE 10
S T. M A R T I N PRESSURE BALANCE SHOWER VALVE SET DE DUCHA DE PRESIÓN BALANCEADA ST. MARTIN SKU: 948310 Note For use with an automatic compensating valve rate at 1.48 gpm (5.6 L/min) or less. This product is engineered to meet the EPA Water Sense ﬂow requirement. The ﬂow rate is governed by the ﬂow controller. If replacement is ever required, be sure to replace it with a WaterSense compliant ﬂow controller to retain the water conserving ﬂow rate of this product.