Installation Sheet

2Granite Composite Sink Installation Instructions
INSTRUCTIONS
For this installation it is assumed that the
counter-top has been cut to the dimensions
of the sink. We recommend consulting a
professional if you are unfamiliar with this
type of installation. Signature Hardware
accepts no liability for any damages to the
floor, walls, plumbing or for personal injury
during installation.
Unpack and inspect the product for any
shipping damages. If you find damages, do
not install. Contact Customer Service at
1-866-855-2284. If you need assistance or
have questions while installing your sink,
contact Customer Service.
TOOLS AND MATERIALS:
Read entire installation instructions.
Observe all local building and safety codes.
BEFORE INSTALLING INSTALLATION
The hole for the faucet can be drilled from either side of
the drop-in sink, depending on your installation needs.
Drill the faucet hole with a 35mm diamond drill bit at the
appropriate location.
Pre-marked hole locations are on the underside of the faucet
deck for guidance. However, faucet holes may be drilled
wherever necessary.
FAUCET DRILLING
Drill
35mm Diamond
Drill Bit